Tips For Winterizing Your Lawn Mower In Australia

A mower works hard through the warmer months, cutting fast-growing grass, collecting clippings and coping with dust. When cooler weather arrives, grass growth usually slows, and the machine may sit unused for several weeks or months. Taking time to prepare it now can prevent rust, stale fuel, flat batteries and difficult starting when spring arrives.

Winter conditions vary widely across Australia. A homeowner in Melbourne may deal with cold mornings and damp storage, while someone in Brisbane may still mow occasionally through winter. In Perth, dry weather can leave fine dust inside the air filter, and in tropical areas the wet season may be more important than winter for storage planning.

The right process depends on whether the mower has a petrol engine, a battery motor or a corded electric system. The essential steps are similar: clean away grass, inspect wear points, protect moving parts and store the machine somewhere dry and secure. Always follow the manufacturer’s manual before using fuel additives, removing covers or servicing the engine.

Decide When To Put The Mower Away

Do not automatically store a mower for the entire winter. In many Australian gardens, the lawn keeps growing slowly during the cooler months, especially in coastal areas and places with mild temperatures. Brisbane and northern New South Wales may require occasional mowing, while cool-season grasses can remain active in parts of Victoria, Tasmania and the Australian Capital Territory.

Choose a period when the grass has clearly slowed and the weather forecast gives you a dry day for cleaning and servicing. Putting away a mower while it is wet traps moisture beneath the deck and around fasteners. If you still expect to mow once or twice, complete the cleaning and inspection steps now, then repeat a quick check after the final cut.

A final mowing session is a useful time to avoid cutting extremely low. Scalping the lawn can expose soil, encourage weed growth and stress grass before cold or wet weather. Set the cutting height according to the grass type and your local conditions, then let the mower cool fully before beginning maintenance.

Clean The Deck And Chassis

Grass clippings mixed with moisture form a corrosive paste beneath the cutting deck. With the engine off, the key removed and the spark plug lead disconnected on a petrol mower, brush away loose debris from the housing, wheels, discharge chute and catcher. Battery mowers should have the battery removed before cleaning, while corded models must be unplugged.

Never place a mower on its side unless the manual identifies the safe direction. Tilting a petrol mower incorrectly can allow oil or fuel to enter the air filter, exhaust or carburettor. For stubborn deposits, use a plastic scraper or stiff brush rather than a metal tool that may damage painted surfaces or expose bare steel.

Use only a small amount of water where necessary, and dry the machine immediately. Compressed air can remove dust from difficult areas, but direct it carefully around seals and electrical connections. Once the deck is clean and dry, inspect it for bubbling paint, cracks, deep dents and loose bolts. Touch up exposed metal with a suitable rust-protective coating.

Drain Or Stabilise Petrol

Old petrol is one of the most common reasons a mower refuses to start after storage. Petrol can lose volatility over time, and modern fuel containing ethanol may absorb moisture if it sits in a warm or poorly sealed tank. Check the owner’s manual to see whether the manufacturer recommends draining the tank, running the carburettor dry or adding a fuel stabiliser.

If you drain the fuel, work outdoors in a well-ventilated area, away from cigarettes, flames, heaters and electrical sparks. Use an approved fuel container and wipe up spills immediately. Do not pour petrol onto soil, into a drain or into household rubbish. Australian councils and state services have different arrangements for household hazardous waste, so use your local resource-recovery centre or approved disposal program.

If you keep fuel in the mower, fill it only as directed by the manufacturer and add a stabiliser designed for petrol engines. Run the engine for the recommended period so treated fuel reaches the fuel line and carburettor. Do not store a petrol mower beside a gas bottle, hot water system or other ignition source, and never keep spare fuel inside the house.

Changing the engine oil before storage is also worthwhile. Warm the mower briefly so the oil drains more easily, then switch it off and allow hot components to cool enough for safe handling. Replace the oil with the grade specified in the manual. Used oil must be taken to an appropriate collection point; it should never go down a stormwater drain or into garden soil.

Service The Blade And Engine

A sharp, balanced blade produces a cleaner cut and places less strain on the motor. Remove the blade only when the mower is safely supported and the manual’s instructions are available. Wear cut-resistant gloves when handling it, because even a stationary blade can have a surprisingly sharp edge. Mark the blade position before removal if its orientation is not obvious.

Look for bends, cracks, heavy corrosion and a worn central hole. A damaged blade should be replaced rather than reshaped. If sharpening it yourself, remove only enough metal to restore the cutting edge and maintain balance. An unbalanced blade can create vibration, loosen fasteners and damage the spindle. A mower repair shop can sharpen and balance the blade if you do not have the right tools.

Inspect the air filter, spark plug lead, throttle cable and recoil starter. Foam filters may be washable if the manual allows it, while paper filters generally need replacement when dirty. Replace a fouled spark plug rather than relying on it to start reliably next season. Avoid spraying general-purpose lubricant into the air filter or onto belts.

Check wheel height levers, catcher clips, handles and safety-control cables. Tighten loose fasteners, but do not overtighten bolts threaded into plastic or thin metal. If the mower has a self-propelled drive, inspect the drive belt and clean grass from the transmission area without flooding it with water.

Look After Battery And Electric Models

Battery lawn mowers need a different storage routine. Remove the battery from the mower, wipe its terminals with a dry cloth and inspect the casing for swelling, cracks or heat damage. A damaged lithium-ion battery should not be used or placed in ordinary rubbish. Contact the retailer, manufacturer or a battery recycling service for safe handling.

Store a healthy battery in a cool, dry place away from direct sun, children and metal objects that could bridge the terminals. Follow the charging level recommended in the manual; many manufacturers advise partial rather than full storage charge. Do not leave the pack permanently connected to the charger unless the instructions specifically permit it.

Australian summers can make sheds extremely hot, while winter garages may become damp. A ventilated indoor utility area is often better than a tin shed with large daily temperature swings. Keep the charger dry and use only the supplied charger or an approved replacement. If the mower will remain unused for a long period, inspect the battery every few weeks and recharge it only as directed.

For corded electric mowers, examine the lead, plug, strain relief and extension cord for cuts or crushed sections. Store the cable loosely coiled rather than tightly wrapped around the handle. Replace damaged electrical components instead of patching them with tape, particularly in areas where winter rain increases the risk of electric shock.

Choose A Dry, Secure Storage Area

The ideal location is sheltered, level, dry and protected from direct weather. A garage, garden shed or covered storage enclosure can work well if it has ventilation and enough clearance around the mower. Do not push a petrol mower against a damp external wall, because condensation can collect beneath the deck and around the fuel tank.

Store the mower with its catcher empty and dry. Rodents may nest inside a catcher, air-filter housing or warm engine compartment, particularly when equipment is left undisturbed. Check for grass seed, leaves and nesting material before covering the machine. Avoid placing bait or chemicals where pets and children can reach them.

Use a breathable mower cover rather than sealing damp equipment beneath plastic. The cover should keep off dust while allowing residual moisture to escape. If the floor is concrete, a rubber mat or raised board can reduce contact with condensation and make it easier to inspect the underside. Do not raise a heavy mower in an unstable position where it could fall.

Keep the mower clear of fertilisers, pool chemicals and garden sprays. Corrosive vapours can damage metal and electrical contacts even when containers are closed. In areas affected by bushfire restrictions, keep petrol and equipment away from dry grass, ignition sources and blocked exits, and follow current local fire-safety directions.

Use A Practical Storage Checklist

A short checklist helps prevent small omissions that become expensive faults. Make a note of the service date and any parts that need replacing before the next mowing season. Retailers such as Bunnings and independent mower shops commonly stock blades, filters, spark plugs, fuel stabilisers and covers, but matching the part number to the manual is more reliable than choosing by appearance.

Before closing the shed, complete these basic preparation tasks:

The storage period is also a good time to organise safe disposal. Used engine oil, old petrol, damaged lithium batteries and worn electronic parts may require different handling. Council collection programs vary between Sydney, Melbourne, Adelaide and regional areas, so check the relevant local authority rather than assuming all waste belongs in the same bin.

Before the first cut after storage, carry out these quick checks:

For petrol equipment, run the mower outside in an open area, never inside a garage with the door partly closed. Let it idle briefly, then test the controls and stop the engine if you notice fuel leaks, strong petrol odour, excessive vibration or an unstable blade. A mower that needs carburettor work or electrical diagnosis is safer in the hands of a qualified repairer.

Make seasonal mower care part of the broader garden routine. Clean irrigation equipment, inspect outdoor taps for leaks and store delicate tools before prolonged rain. A few minutes spent recording faults now can save time when warmer weather brings rapid lawn growth and a busy garden maintenance schedule.

Give your mower a careful clean, service and storage check before its next long rest. Use the owner’s manual for model-specific instructions, dispose of fuel and oil through approved Australian channels, and arrange professional servicing whenever a safety component or engine fault is beyond a basic home inspection.